Comparison of thermophilic and hyperthermophilic dark fermentation with subsequent mesophilic methanogenesis in expanded granular sludge bed reactors

Herein, dark fermentation (DF, V = 5.5 L) and subsequent mesophilic methanogenesis (V = 43.5 L) are run as expanded granular sludge bed reactors (EGSB) at thermophilic (υDF = 60 °C) and hyperthermophilic (υDF = 80 °C) temperatures. A synthetic glucose wastewater is run with a 22.5 g/L chemical oxygen demand (COD) and 48–9 h hydraulic retention times (HRTs), giving organic loading rates (OLRs) of 11–60 g COD/L/d for DF. The maximum hydrogen production rate (HPR) is HPR = 3.0 m³/m³/d for HRT = 9 h with a 50 L/kg COD hydrogen yield (HY) and 40 vol% H₂. Methane production rate (MPR) reaches MPR = 2.6 m³/m³/d with 70 vol% CH₄ at HRT = 2.8 d. The highest H₂ yields are HY = 180 L/kg COD with 53 vol% H₂ (thermophilic, HRT = 48 h). Hyperthermophilic temperatures led to lower HPRs (0.7 m³/m³/d) and MPRs (1.6 m³/m³/d). 53% of Thermoanaerobacterium thermosaccharolyticum as an H₂ producer are found. Discoloration of granular sludge from black to white and granule stability was observed in DF.     

Deep-blue thermally activated delayed fluorescence emitter with a very high fluorescence rate

Conventional thermally activated delayed fluorescence (TADF) molecules achieve small energy differences between the lowest singlet and triplet excited states (ΔE_ST) by enhancing the intramolecular charge transfer, which inevitably leads to a wide emission spectrum and low fluorescence rate. Here, we prepared a deep blue TADF molecule via a small ΔE_ST pyridine-phenol fluoroboron complex as the acceptor. The small ΔE_ST is maintained when carbazole donors are attached to the 4-position of the phenyl rings in the fluoroboron complex. Benefiting from the strong electron coupling between the donor (D) and acceptor (A) moieties, the compound Cz-4-BF exhibits a high fluorescence rate of 4.8 × 10⁸ s⁻¹ and a small D-A dihedral angle change in the excited state. Consequently, a photoluminescence (PL) quantum yield of nearly 100% and a PL spectrum with full-width at half-maximum (FWHM) < 60 nm were obtained in solution and low-concentration doped films. A TADF-sensitized fluorescence (TSF) device containing Cz-4-BF achieves an external quantum efficiency of 21%, which is higher than the devices employing classical fluorescent emitters and multiple resonance-type TADF emitters. The Cz-4-BF-based TSF device shows significantly improved color coordinates of (0.14, 0.10) versus a control device without Cz-4-BF.     

Preventive replacement policies with time of operations,mission durations,minimal repairs and maintenance triggering approaches

When a mission arrives at a random time and lasts for a duration, it becomes an interesting problem to plan replacement policies according to the health condition and repair history of the operating unit, as the reliability is required at mission time and no replacement can be done preventively during the mission duration. From this viewpoint, this paper proposes that effective replacement policies should be collaborative ones gathering data from time of operations, mission durations, minimal repairs and maintenance triggering approaches. We firstly discuss replacement policies with time of operations and random arrival times of mission durations, model the policies and find optimum replacement times and mission durations to minimize the expected replacement cost rates analytically. Secondly, replacement policies with minimal repairs and mission durations are discussed in a similar analytical way. Furthermore, the maintenance triggering approaches, i.e., replacement first and last, are also considered into respective replacement policies. Numerical examples are illustrated when the arrival time of the mission has a gamma distribution and the failure time of the unit has a Weibull distribution. In addition, simple case illustrations of maintaining the production system in glass factories are given based on the assumed data.     

Effect of surcharge loading rate and mobilized load ratio on the performance of vacuum–surcharge preloading with PVDs

The results from three laboratory model tests performed under various vacuum and surcharge loads with PVDs are reported. Different SLRs were adopted to investigate the effect on the consolidation of dredged soil. To measure the lateral displacement, a refitted inclinometer was developed and tested. In the tests, the settlement, lateral displacement, and vane shear strength were measured, and the degree of consolidation (DOC), horizontal coefficient of consolidation (C_h), and bearing capacity were calculated. The results indicate that larger SLR values promote consolidation. The largest vane shear strength, settlement, and C_h values were all obtained under the highest SLR, and the bearing capacity under this SLR was more than double that under the lowest SLR. The DOC was found to increase with the growth of the SLR. However, considering the vacuum pressure was higher in Case-III, the influence of SLR on reinforcement effect may not be so significant.     

含水率对砂岩动态拉伸强度的影响

工程中的岩石具有不同的含水性，研究不同含水率岩石动态力学性质的变化规律，对岩石工程的设计和建设具有很强的指导意义。为研究不同含水率对砂岩动态拉伸强度的影响，利用霍普金森压杆（SHPB）试验装置对不同含水率试样进行了一系列动态巴西劈裂试验，研究了不同含水率砂岩在不同加载率条件下的动态拉伸强度变化规律。试验结果表明：岩石的动态拉伸强度随着加载率的增加而增加，其率相关性与含水率有关，饱和试样的率相关性较强，而干燥岩石的动态强度对加载率的变化不敏感。当加载率较低时，岩石的拉伸强度随着含水率的增加而降低；当加载率较高时，由于水的Stefan效应，水对岩石裂纹产生抗力，阻碍其扩展，导致岩石强度增加，饱和试样的动态拉伸强度出现高于非饱和试样强度的现象。     

流量替代渗透率评价破碎性储层工作流体伤害程度

若地层岩石整体强度偏低,在力学环境改变后岩石易破碎成不规则破裂体,则储存油气资源的此类破碎地层被称为破碎性储层。由于破碎性储层在纵向上存在着较强的非均质性,通过测试单个柱塞岩样在工作流体伤害前后的渗透率变化难以体现工作流体对储层的整体伤害程度。为此,利用达西定律先从理论上探讨用流量替代渗透率定量表征储层伤害程度的可行性,再开展单层开采、双层及三层并采的流量测试实验,评价工作流体对单层、多层储层的整体伤害程度,并将流量损害率与渗透率损害率进行对比以求证流量替代渗透率的可行性。研究结果表明:①单层开采时,流量损害率与渗透率损害率基本一致,渗透率损害率是流量损害率的一种特殊形式;②双层及三层并采时,单层各自稳定流量损害率与渗透率损害率接近,且流量损害率可以定量表征并采储层的整体伤害程度,而渗透率损害率则无法定量表证;③稳定流量损害率较累积流量损害率更接近渗透率损害率。结论认为,测定稳定流量可以替代测定渗透率评价工作流体对破碎性储层的伤害程度,从而为优选工程技术与评价工作流体的适应性提供了方法依据。     

光学球罩数控抛光工艺关键技术研究

光学球罩被广泛应用于各类光电系统中,其面形精度制约着光电系统的成像质量。随着数控技术的发展,数控加工技术逐渐成为目前光学加工行业的主流发展方向。基于高质量的铣磨表面,为了能够在准球心高速抛光工艺中实现等去除量加工,本文对同步抛光技术进行了理论分析及数学模型推导,并通过实验证明,同步抛光技术可以有效地提升加工效率,获得高质量的光学表面。     

强夯的物质点法模拟及其能量转化规律分析

提出大应力范围内的密度相关土体本构模型,适用于分析强夯等作用下的土体变形问题。对刚柔接触算法进行了修正,用物质点法结合提出的本构模拟了强夯过程。与其他数值模拟将荷载假设为三角形应力波作为输入荷载不同,通过输入夯锤与土体的碰撞速度实现加载。模拟结果与承德机场4标段某处试验数据进行了对照,吻合较好。提出强夯过程中的能量转化率的概念,对能量转化的规律进行了研究,为研究强夯问题提供了新视角。模拟分析表明,能量转化率的提高不总意味着每击夯沉量的提高,因为能量在较大范围的扩散可能导致高能量转化率下的低夯沉量;剪切变形过程中吸收较多的塑性应变能,可能会使体积压缩变形吸收的塑性应变能向局部集中。通过数值模拟还发现,重锤低落时的能量转化率高于轻锤高落,一般可产生更大的夯沉量。     

低开销负载均衡的改进型TORA协议

针对无线传感器网络拓扑快速变化、链路易拥塞断开，存在路由开销大、负载不均衡、网络生命周期短等问题，提出低开销负载均衡的改进型TORA（TORA-p）。通过定义网络变化率参数，自适应调整互联网封装协议（IMEP）中OBM包的最大重发次数，减少不必要的路由维护开销；同时，结合MAC层信息，定义链路可用性优化选路方式，自动平衡网络负载，避免关键路径和节点负载过重而过早死亡和断开。使用truetime2.0平台设定特定的仿真环境，对TORA-p算法的性能进行了详细比较分析，结果表明：TORA-p均衡了网络负载，提升了网络生命周期，同时也减少了路由开销和延时，展现出了较好的数据传输能力。     

基于概率感知模型的多节点联合网络覆盖算法

针对传感网在对关注目标节点进行覆盖过程中出现的非连续性覆盖，将会产生覆盖盲区以及大量冗余数据迫使通信链路出现瓶颈现象，提出了一种基于概率感知模型的多节点联合覆盖算法（Multi-Node Joint Network Coverage Algorithm，MNJC）。该算法借助于概率相关知识，给出了多节点联合时覆盖质量期望值计算方法，以减少覆盖盲区的产生，提高了多节点联合网络覆盖率；利用节点动态转换机制对节点部署进行重新优化，抵制了网络能量的快速消耗，延长网络生存周期；该算法与其他三种算法覆盖率、生存周期以及节点存活数量等方面进行了比对实验，其性能指标平均提升了18.11%，15.57%和8.26%，从而验证该算法的有效性和实效性。